Table of Contents
Advertisement
Introduction
WARNING:
AVERTISSEMENT :
•
•
•
About this Guide
This guide contains information about the Extron FOXBOX family of fiber optic products. The
FOXBOX family supports long distance transmission of VGA, YUV, and DVI video and analog
audio signals (see
About the FOXBOX Tx/Rx Transmitters and Receivers
The FOXBOX family consists of the following ultra-high performance fiber optic transmitters
and receivers:
•
•
•
The FOXBOX Tx/Rx outputs continuous invisible light (Class 1 rated), which
may be harmful to the eyes; use with caution.
Le FOXBOX Tx/Rx émet une lumière invisible en continu
(conforme à la classe 1) qui peut être dangereux pour les yeux, à utiliser avec
précaution.
•
Do not look into the rear panel fiber optic cable connectors or into the fiber optic
cables themselves.
•
Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau arrière
ou dans les câbles fibre optique eux-mêmes.
•
Plug the attached dust cap into the optical transceiver when the fiber optic cable is
unplugged.
•
Branchez la protection contre la poussière dans l'ensemble émetteur/récepteur
lorsque le câble fibre optique est débranché.
About this Guide
About the FOXBOX Tx/Rx Transmitters and Receivers
Features
figure 1
on the next page).
FOXBOX Tx VGA transmitter — Accepts an analog RGB video input, an audio input,
and an RS-232 serial input and outputs a proprietary optical signal on an LC connector
to a FOXBOX or FOX 500 receiver. It also can receive a proprietary optical signal from
the receiver consisting of the RS-232 return from a controlled device.
FOXBOX Tx VGA/YUV transmitter — Similar to the FOXBOX Tx VGA, but with the
ability to support bi-level and tri-level YUV formats such as the 480p, 576p, 720p,
1080i, and 1080p HDTV rates. It can also accept RGBHV video.
FOXBOX Rx VGA receiver — Accepts a proprietary optical signal on an LC connector
from a FOXBOX (except FOXBOX Tx DVI Plus) or FOX 500 transmitter or daisy-chained
receiver and outputs analog RGB or component video, audio, and RS-232 serial
commands. It also can either:
Receive an RS-232 return from a controlled device and send it to the transmitter via
•
a proprietary optical signal.
Output a daisy-chained signal to another receiver.
•
FOXBOX Tx / Rx • Introduction
1
Advertisement
Table of Contents
