Installation Procedure; Installation Of Din Rail - Omron KE1 User Manual

■ Installation procedure

● Installation of DIN rail
When installing Model KE1, use the DIN rail or screws.
When using the DIN rail, fix it with three or more screws within the control panel.
Recommended DIN rail

Model
Model PFP-100N
Model PFP-50N
End plate Model PFP-M (2 pieces)

Installation direction

The installation direction of Model KE1 has been determined. As shown below, place the
DIN rail vertical to the ground and install it in the horizontal direction.
Vertical: 
Dimensions Manufacturer
1,000 mm
500 mm
Horizontal: 
OMRON
Lateral: O
2.2 Installation
Longitudinal: X
2-9