Info Display - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Operating diagram
7.4

Info display

In the info display, the most important parameters for each menu item of the first menu
level are displayed.
Access to the info display from the continuous display is undertaken by pressing the
key. Pressing the
recalls the continuous display again.
OPERATION
2.20
25.0 °C
Ⓘ VERSIONS
SW-VER 01.00.00.00
BL-VER 03.02.02.01
SN 2366733289 (05)
Ⓘ
LASTERROR
NO SENSOR 135 min
ppmRange↑
ppmRange ↓136 min
Fig. 20: Info display
By pressing the
the selection menu of this info display.
Pressing the key brings you straight back to the info display.
Info display [MEAS]
The info display [MEAS] shows the following measured values:
[BOARDTEMP]: Current housing interior temperature
–
[CURRENT]: Current value flowing through the sensor in µA.
–
[CE: xxxx / AE: xxxx ], internal status variable (only for service engineer)
–
These values are for information purposes only and cannot be changed.
44
key again toggles to the next info display. Pressing the
ppm
ⒾLIMITS
4,80
LIMIT↑ =
0%
LIMIT ↓=
LIMIT ↓
Ⓘ MEAS
BOARDTEMP= 50 °C
88 min
CURRENT=11.83 µA
CE: -25
key, you can jump from the currently displayed info display directly to
ⒾCONTROL
4.80ppm PUMP:
TYPE:
1.50ppm
BASIC=
Ⓘ INPUT
SENSOR:
TEMP:
CONTACT:
Ⓘ PROBE CAL
ZERO=
SLOPE=2349nA/ppm
Ⓘ OUTPUT
P-REL:
f-REL:
mA OUT:
/ AE:140
key
dosing ↓
P
0%
CLB2
auto
pause
-51µA
47%
alarm
dosing
meas val
A1004