Printer Trouble - Oce fx2081 User Manual

6.4 Printer trouble

Symptom
Alarm lamp illumi-
nates.
Cannot print.
Cannot print on
specified paper.
Printing speed is
slow.
6-4
What to confirm
Is any error message
displayed on the LCD?
Is the machine turned
on?
Is the USB cable or
LAN cable connected
properly?
Did you choose the cor-
rect printer port?
Is any error message
displayed on the LCD?
Has the correct IP
address been set on
your machine? (only
when using network)
The printer driver
may not be installed
properly.
Setting on application
software is incorrect.
Computer may not
have enough memory.
The print job is large
or complex.
Suggested solutions
Confirm the displayed message and
fix it (see page 6-3).
Turn the machine on by pressing the
[I] side of power switch.
Check the cable connection.
Check whether the printer port set-
ting is correct on your computer.
With a local printer, the printer port
should be USBxxx (xxx represents
port number).
With a network printer, the LPR
port with the same address as the
IP address set on this unit should be
selected.
If the wrong printer port has been
selected, change it to the correct one.
Confirm the displayed message and
fix the issue (see page
Confirm the correct IP address with
network administrator and set the
correct one.
Reinstall the printer driver.
Check set paper size in application
software. Then confirm "Paper Size"
setting on set window for printer
driver. If both are not reflected on
actual printout, change those set-
tings.
Install more RAM in your computer.
The machine takes a lot of times
when printing a large print job.
Please wait until the machine fin-
ishes the job.
6-3).