The Control Panel; Figure 1. The Control Panel's Rack - Pima FORCE Installation Manual

Figure 1. The control panel's rack

2.3

The control panel

18
19
Following is the list of the control panel's terminals:
1. Zone inputs Z1-Z8, detectors voltage (+)/(-)
2. Tamper switches 1-2 inputs
3. External/internal Sirens, (+)/(-)
4. ALRM output (by default, switched to (-) at alarm)
5. ON/OFF output: (by default, switched to (-) on arming)
6. GND (-)
7. Relay output: NC (Normally Close), C (Common), NO (Normally Open)
17 16 15
1
Figure 3. The control panel
Figure 2. The rack's cover
2 3 4 5 6
Chap. 2: Installation & Wiring
14
10
7 8 9
13
12
11
9