Chap. 13 Tests & Diagnostics
In the main screen, press
1)
Event Memory
2)
Zone Test. See below.
3)
Output Test
4)
Power Diagnostics
5)
Communication Tests
6)
Comm. Monitor
13.1
Event Memory
Tests & Diagnostics
Event Memory
The
stores up to 1,000 events. Each event is made of a time stamp, the event
description, and the event source.
Scroll through the events using the up/down arrow keys.
13.2
Zone Test
Tests & Diagnostics
Zone Test
The
menu includes the following sub-menus:
1)
Single Zone: enter the desired zone number, trigger the detector and check the
Successfully Tested
2)
All Zones: walk through the entire premises, trigger the detectors and check the display:
5)
Tested: the number of tested zone, out of the overall defined zones.
6)
Last Tested (zone)
7)
Failed/Not Tested: a list of the zones that failed the test or were not tested.
3)
Audible Indication: select from the following list:
Keypad Buzzer
Beep-External Siren
Beep-Internal Siren
13.3
Output Test
Tests & Diagnostics
Output Test
The
menu includes the following sub-menus, for testing the physical outputs. If an
output is not functioning properly, it helps defining whether it is a hardware or configuration
based problem:
1)
Onboard: select any of the control panel's outputs and
available outputs are:
2)
Zone Expanders: select an expander (press # or *) and
expander's relay output/s. To easily locate the expander, press
Activate/Deactivate
Tests & Diagnostics
Event Memory
Zone Test
field.
Output Test
External/Internal Siren, Relay, On/Off, Alarm
the expander's buzzer.
. This menu includes the sub-menus that follows.
Activate/Deactivate
Activate/Deactivate
Chap. 13: Tests & Diagnostics
it. The
.
the
Activate Buzzer
and
45