Programmable Output Types - Pima FORCE Installation Manual

Force Security System - Installation Guide
10.1

Programmable Output Types


System Configuration
Programmable Output Types
See
The default alarms and sirens programmable output types match the default zone
types, and should not be changed in most installations.
Each Programmable output types' timer has 3 options:
Time (sec) Description
0 The output type will activate the physical
output until the alarm system is disarmed.
1-9998 The output type will activate for the set
time.
9999 The output type will activate for as long as
the source event exist.
Programmable output type
 Alarms
Burglary
Panic
Silent Panic
Fire
Medical
Duress
Anti-mask
Tamper Alarm
 Custom Zone Types 1-5
 Faults
Any Fault
AC Fault
Low Battery
Phone line/Net
GSM Module
Communication
Tamper
10 Glossary
See the , on page 54.

Timers and Counters
, on page 50, for details on all the programmable output types.
Default
240
9999
240
Programmable Output Types
Use example
Turning a floodlight on
Fire Alarm: escape door opening
AC Fault: flashlight indication
Programmable out type
External Siren
Internal Siren
Zone Bypass
Smoke Reset
Chime
Output-Keyfob
Energy Saving
Invalid Code
 Operation Codes 1-8
10
Default
240
9999
60
3
5
15 min
5