Parameter
Line Check at
Disarm
Callback No.
8.5
Network Settings
System Configuration
Parameter
Network Connection
DHCP
Static IP
Netmask, DNS, Default
Gateway
Callback Address, Port
8.6
GSM/GPRS Settings
System Configuration
Parameter
GSM Module
Virtual Provider
Callback Address,
Port
APN 1 Settings
Details
When the alarm system is disarmed dial tone will be checked every 1
minute.
Set a telephone number for the control panel, to call the computer
running the Upload/Download software. This number is displayed in the
Remote Service
user menu under
4410460).
CMS & Communications
Details
The control panel is connected to Ethernet network.
The control panel is automatically assigned with an IP address by
the router. If you don't select it, enter a static IP address (next).
Enter a valid IP address of the control panel. When the IP address is
set, the DHCP parameter is ignored (even if selected).
Set these parameters.
Set an IP address and port no. for the control panel to return a
session connection, in response to a request made by the FORCE
Manager software, or by a user (from the User Menu.)
CMS & Communications
Details
Installed
Select
, if the module is connected.
Select if the SIM card's provider is virtual.
Set an IP address and port no. for the control panel to send a connection
request, in response to a request made by the FORCE Manager software.
1)
Name: user text, up to 16 characters.
2)
Username, Password: obtain these from the service provider.
Chap. 8: CMS & Communications
. See the User guide for details (P/N
Network Settings
GSM/GPRS Settings
37