Chap. 11 General Settings - Pima FORCE Installation Manual

Force Security System - Installation Guide

Chap. 11 General Settings

Following is the parameters of the
Parameter
System Name
Service Provider
Contract Expiration
Technician Code
 One Key Arming
 Display Alarms at
Arm
 Final Door
Arming
 Home Modes-
Instant
 Additional CMSs
 Zone Bypass-
Auto Arm
 Momentary Key
 Beep on Arming
 Beep on
Disarming
 Arm Prevention -
Faults
42
General Settings
Details
Appears in contacts' notifications. User text, up to 16 characters.
User text, up to 24 characters. The text is displayed when pressing and
holding 0 (zero).
Date to display appropriate message onscreen
Change code, 4-6 digits.
Arming with the Arm Away+Home1 keys
enabled.
Alarm messages will be displayed when the control panel is armed.
Closing any delayed zone during the exit delay, terminates the delay.
No exit delay when arming in Home 1-4 modes
 Selected: setting CMS 2 parameters + code is enabled
 Unselected: setting CMS 2 parameters + code is enabled only by
using the Master technician code.
Open zones are automatically bypassed when auto-arming
 Selected: momentary key switch
Unselected: toggle key switch

Any Arming: the siren will sound a beep, whenever the alarm system
is armed.
 Key switch/Key fob: the siren will sound a beep, when the alarm
system is armed by key switch or key fob.
 Inactive
 Any Disarming: the siren will sound 2 beeps, whenever the alarm
system is disarmed.
 Key switch/Key fob: the siren will sound 2 beeps, when the alarm
system is armed by key switch or key fob.
 Any+Alarm in Memory: the siren will sound 3 beeps, whenever the
alarm system is disarmed, if the alarm was triggered when the
system was armed.
 Key Switch+Alarm Mem: the siren will sound 3 beeps, whenever the
alarm system is disarmed using keyfob or key switch, if the alarm
was triggered when the system was armed.
 Inactive
See below.
menu:
) , (
, with no passwords is