Power Diagnostics; Communication Tests; Communications Monitor - Pima FORCE Installation Manual

Force Security System - Installation Guide
3)  Output Expanders: select an expander (press # or *) and an output, and
Deactivate
it. To easily locate the expander, press
the expander's buzzer.
4)  Keypad Buzzer:
13.4

Power Diagnostics


Tests & Diagnostics
Power Diagnostics
The
and peripherals' voltage and current status.
1)  Zone Expanders: select
current.
2)  Keypads: select a keypad (press # or *) and see its current voltage and current.
3)  Output Expanders: select an expander (press # or *) and see its voltage and current.
4) Battery Voltage: the backup battery's voltage status.
5) Panel Current: the control panel and the peripherals' current consumption. Note that
the display indicates that the peripheral is powered by a local power supply and so its
current is not pulled from the control panel.
13.5

Communication Tests

The FORCE allows you to test each CMS defined communication path - telephone number, URL
etc., by generating a Test report. During the test the display shows the online communication
process - dialing, connecting, sending, etc.
13.6

Communications Monitor

Select any communication path and view the current data exchange.
46
Activate/Deactivate
Power Diagnostics
menu includes the following sub-menus, for viewing the control panel
Local Remote Expanders
or
Activate Buzzer
the buzzer.
and view the card's voltage and
Activate/
Activate/Deactivate
and
PS
on