Table of Contents
Advertisement
◆Battery Power Bar Settings
VOL represents voltage settings. Each bar represents a voltage value. Each of the 5 values is to be
entered one by one. For example, VOL 1 is the first bar voltage value, the default value is 31.5V. Press
UP or DOWN button to increase or decrease the bar value and press ON/OFF button to store a
changed setting and access the second bar. Likewise, you can set the values in the same manner for
other bars. After values for 5 bars are entered completely, press ON/OFF to confirm and return to the
previous menu.
◆Assist Level Settings
SCA represents assist level settings.
Assist Level mode options
There are 8 assist level modes: 0-3, 1-3, 0-5, 1-5, 0-7, 1-7, 0-9, 1-9. The default mode is 0-5.
Press the UP/DOWN button to increase or decrease until the desired mode is displayed.
Press the ON/OFF button and access the assist level ratio settings automatically.
Assist Level Ratio Information
Short press " ON/OFF" button to check about ratio value of each assist level.
Battery Bar Settings
"1-5" flash
Assist Level Setting Interface
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KD21C and is the answer not in the manual?
Questions and answers
How to reset total mile on display
The total miles on the Key-Disp KD21C display cannot be reset. The trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, selecting "Y" for yes, and then holding the power button, but the total miles always remain on the bike.
This answer is automatically generated
How to reset total miles on display
The total miles (odometer) on the Key-Disp KD21C display cannot be reset. Only the trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, then selecting "Y" for yes, and confirming by holding the power button.
This answer is automatically generated