Table of Contents
Advertisement
Press the UP/DOWN button to choose delay time 3s, 6s, 12s to change the settings.
Press the ON/OFF button to confirm and access the max speed limit settings.
Push-assistance Enable/Disable information
PUS represents push-assistance enable/disable settings. "Y" means push-assistance is enabled, "N"
means push-assistance is disabled.
Press the ON/OFF button to access slow start up settings.
Slow Start up Information
SSP represents slow start up.
Press the ON/OFF button and moves to Delay time information for battery power.
Hold the ON/OFF button for 2s to return to previous menu, .
◆Power-on Password Settings
PSd represents power-on password settings. Power-on password is a 4-digit code. The default
password is "1212".
Press ON/OFF button to enter the interface where "P2, 0000" is shown on the screen. Please input
Battery power delay time settings Interface
Push-assistance information Interface
Slow Start-up Information Interface
14
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KD21C and is the answer not in the manual?
Questions and answers
How to reset total mile on display
The total miles on the Key-Disp KD21C display cannot be reset. The trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, selecting "Y" for yes, and then holding the power button, but the total miles always remain on the bike.
This answer is automatically generated
How to reset total miles on display
The total miles (odometer) on the Key-Disp KD21C display cannot be reset. Only the trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, then selecting "Y" for yes, and confirming by holding the power button.
This answer is automatically generated