Table of Contents
Advertisement
◆Backlight settings
bL represents backlight settings. Level "1" is the lowest brightness. Level "2" is the medium
brightness. Level "3" is the highest brightness. The default value is "1".
To change the backlight brightness, press the UP/DOWN button to increase or decrease until the
desired brightness is displayed.
To store a changed setting, press the ON/OFF button and access unit toggling settings.
◆Unit km/mi toggling
U represents unit settings, "1" is mile, and "2" is kilometer. The default value is "2".
To toggle the unit, press the UP/DOWN button until the desired unit is displayed.
To store a changed setting, press the ON/OFF button and access trip distance clearance settings
again or hold the ON/OFF button for 2s to exit General Settings.
Trip Distance Clearance Settings Interface
Backlight Brightness Setting Interface
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KD21C and is the answer not in the manual?
Questions and answers
How to reset total mile on display
The total miles on the Key-Disp KD21C display cannot be reset. The trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, selecting "Y" for yes, and then holding the power button, but the total miles always remain on the bike.
This answer is automatically generated
How to reset total miles on display
The total miles (odometer) on the Key-Disp KD21C display cannot be reset. Only the trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, then selecting "Y" for yes, and confirming by holding the power button.
This answer is automatically generated