Battery Power Bar Settings; Personalized Parameter Settings; Power Assistant Level Settings; Power Assistant Level Option - Key-Disp KD58C User Manual

desired value is displayed.
To store a changed setting, hold MODE for 2 s and the display will display OK
then returns to general selection settings interface .
◆

Battery Power bar Settings

VOL represents voltage settings. Each bar represents a voltage value. 5 bars voltage
values must be entered one by one. For example, VOL 1 is the first bar voltage value, the
default value is 31.5V.
To set battery power bar, press UP/DOWN to increase or decrease the number.
To store a changed setting and access the second bar, press the MODE button.
By analogy, after 5 bars voltage values is entered, hold MODE for 2 s to confirm and
return to the previous menu.

Personalized Parameter Settings

Personalized Parameter Settings can match various requirements in use. T
Hold the UP and DOWN button for 2 s to enter general settings, then use the same
manner to enter personalized parameter settings selection interface. Press the UP or
DOWN button to choose the personalized parameter settings items, then press the
MODE button to enter the corresponding settings interface.
◆

Power Assistant Level Settings

Power Assistant Level option

In assistance level settings, there are 8 modes to select: 0-3, 1-3, 0-5, 1-5, 0-7, 1-7,
0-9, 1-9. The default value is 0-5.
To select the mode of assistance level, press UP/DOWN to increase or decrease until
the desired setting is displayed.
To store the changed setting and access the PAS ratio settings page, press the
MODE button.
Limit Speed Settings Interface
Battery Power Bar Settings
Personalized parameter settings
Interface
6