Table of Contents
Advertisement
Personalized Parameter Settings&Information
Personalized Parameter Settings&Information can meet a variety of riders' personalized
requirements. 8 options are Battery Power Bar Settings, Power assist level Settings, Over-current Cut
Information, Power Assist Sensor Information, Speed Sensor Information, Throttle Function Information,
System Settings&Information and Power-on Password Settings. Please refer to Attached list 2 for the
definition of the symbols. Some versions of displays, conditional upon protocols will not have setting
items from "3" to "7"
Hold UP and DOWN button simultaneously for 2 seconds to enter General Settings and Hold UP
and DOWN button simultaneously for another 2 seconds to enter Personalized Parameter
Settings&Information interface.
Press UP or DOWN button to choose the personalized parameter for checking and settings, then
press ON/OFF button to enter the corresponding interface.
Setting Item Cycle Interface
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KD21C and is the answer not in the manual?
Questions and answers
How to reset total mile on display
The total miles on the Key-Disp KD21C display cannot be reset. The trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, selecting "Y" for yes, and then holding the power button, but the total miles always remain on the bike.
This answer is automatically generated
How to reset total miles on display
The total miles (odometer) on the Key-Disp KD21C display cannot be reset. Only the trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, then selecting "Y" for yes, and confirming by holding the power button.
This answer is automatically generated