Table of Contents
Advertisement
◆Exit settings
In Personalized Parameter Settings&Information Interface,
Press the ON/OFF button is to confirm the input.
Hold the ON/OFF button is to store the settings and exit the current setting.
Hold the DOWN button is to cancel the operations but not to store setting data and return to
previous menu.
■If there is no operations in two minutes, the display will exit the settings interface.
Recover default settings
dEF represents recovering default settings. The default value is N.
To access recover default settings, hold both UP and ON/OFF button for 2s and then access
selection interface. Press the UP/DOWN button to choose "Y" or "N". "N" means not recovering default
settings. Y means recovering default settings.
When it is "Y", hold the ON/OFF button for 2s to recover default settings, the display shows DEF-00
at the same time and returns to display start-up page
Power-on Password Change Interface
.
Recover Default Settings Interface
16
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KD21C and is the answer not in the manual?
Questions and answers
How to reset total mile on display
The total miles on the Key-Disp KD21C display cannot be reset. The trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, selecting "Y" for yes, and then holding the power button, but the total miles always remain on the bike.
This answer is automatically generated
How to reset total miles on display
The total miles (odometer) on the Key-Disp KD21C display cannot be reset. Only the trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, then selecting "Y" for yes, and confirming by holding the power button.
This answer is automatically generated