Battery Power Bar Settings; Power Assistant Level Settings; Power Assistant Level Select - Key-Disp KD21C User Manual

Electric bicycle meter

Hide thumbs Also See for KD21C:

Table of Contents

Hold both UP and DOWN more than 2 seconds to enter general settings, then hold

both UP and DOWN again to enter personalized parameter settings items selection page.

Press UP or DOWN to choose the personalized parameter settings items, and press

MODE to enter the corresponding settings page.

◆ Battery Power Bar Settings

VOL means voltage settings. Each bar represents a voltage value. 5 voltage values

must be entered one by one. For example, VOL 1 is first bar voltage value, the default

value is 31.5. Press UP or DOWN to increase or reduce the number. Press MODE to

confirm and enter the second bar. By analogy, after 5 voltage values is entered , hold

MODE to confirm and return to previous menu.

In power assistant level settings, there are 8 modes to select：0-3, 1-3, 0-5, 1-5, 0-7,

1-7, 0-9, 1-9. The default mode is 0-5. Press UP or DOWN to select the mode, and press

MODE to confirm and enter the PAS ratio settings page.

Option Select Interface

Battery Power Bar Settings

Table of Contents