Assistant Sensor Settings, Speed Sensor Settings, Throttle Function
Settings, System Settings and Power-on Password Settings. Please
refer to the Attached list 2.
To access Personalized Parameter Settings items option page, hold
both the UP and DOWN button for 2s, then hold both the UP and DOWN
button again.
To access the corresponding settings page, press the UP/DOWN
button to increase or decrease until the desired item is displayed, and
press the MODE button again.
◆Battery Power Bar Settings
VOL represents voltage settings. Each bar represents a voltage
value. 5 bars voltage values must be entered one by one. For example,
VOL 1 is first bar voltage value, the default value is 31.5.
To set battery power bar, press the UP/DOWN button to increase or
decrease the number.
Briefly press the MODE button and access the second bar, by
analogy, after 5 bars voltage values is entered , hold the MODE button to
confirm and then return to the previous menu.
Options Selection Interface
Battery Power Bar Settings
9
Need help?
Do you have a question about the KD21C and is the answer not in the manual?