Table of Contents
Advertisement
HL-N means throttle push-assistance function is disabled.
HL-y means throttle push-assistance function is enabled.
Throttle Level Enable/Disable Information
HF-y means throttle speed is limited by current power assist level while HF-n means throttle speed
is not limited by current power assist level.
y means the maximum speed can only be the highest speed powered by current power assist level
when you twist the throttle.
n means the maximum speed is not limited by current power assist level and you can override
whatever level you are in and reach rated maximum speed when you twist the throttle.
Hold the ON/OFF button for 2s to return to previous menu.
◆System Settings and Information
Delay time settings for battery power
DLY represents battery power delay time settings. The default value is 3s.
.
Throttle Push-assistance Enable/Disable Interface
Throttle Level Enable or Disable Interface
13
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KD21C and is the answer not in the manual?
Questions and answers
How to reset total mile on display
The total miles on the Key-Disp KD21C display cannot be reset. The trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, selecting "Y" for yes, and then holding the power button, but the total miles always remain on the bike.
This answer is automatically generated
How to reset total miles on display
The total miles (odometer) on the Key-Disp KD21C display cannot be reset. Only the trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, then selecting "Y" for yes, and confirming by holding the power button.
This answer is automatically generated