Speed-Limit Settings; Battery Power Bar Settings; Personalized Parameter Settings - Key-Disp KD58C User Manual

◆Speed-limit Settings

Set LS represents limited speed settings. When the running speed is faster than
limited speed, the E-bike system will be switched off automatically. Limited speed
range is 12Km/h to 40Km/h. The default value is 25Km/h.
To change basic settings, press UP/DOWN to increase or decrease until the
desired value is displayed.
To store a changed setting, hold ON/OFF for 2 s and the display will show 'OK'
then returns to general selection settings interface .

◆Battery Power bar Settings

VOL represents voltage settings. Each bar represents a voltage value. 5 bars
voltage values must be entered one by one. For example, VOL 1 is the first bar voltage
value, the default value is 31.5V.
To set battery power bar, press UP/DOWN to increase or decrease the number.
To store a changed setting and access the second bar, press the ON/OFF button.
Likewise, after 5 bars voltage values are entered, hold ON/OFF for 2 s to confirm
and return to the previous menu.
Personalized Parameter Settings(Specific Set)
Personalized Parameter Settings(Specific Set) can match various requirements in
use.
Hold both UP and DOWN button for 2s to enter general settings and hold the UP
and DOWN button for 2s again to enter personalized parameter settings selection
interface. Press the UP or DOWN button to choose the personalized parameter settings
items, then press the ON/OFF button to enter the corresponding settings interface.
Wheel Diameter Settings Interface
Limit Speed Settings Interface
Battery Power Bar Settings
6