Auto Calibration - Sony STR-DA3600ES Operating Instructions Manual

Menu Description
Multi Zone Makes the settings for Multi
Zone (page 114).
Audio Sets various sound items
(page 116).
Video Adjusts the resolution of
analog video signals
(page 118).
HDMI Makes settings for sound/
images from components
connected to the HDMI jacks
(page 119).
Network Makes the settings for the
network (page 121).
Quick Click Controls components
connected to the receiver
using an external control
device (page 123).
System Makes the settings for the
system of the receiver
(page 124).

Auto Calibration

Calibration Start
Performs auto calibration. For details, see "10:
Calibrating the appropriate speaker settings
automatically (Auto Calibration)" (page 46).
Note
The measurement results will be overwritten and
saved on the currently selected position in the
Position menu.
Calibration Type
Lets you select the calibration type for each
seating position. For details, see "Saving the
measurement results" (page 49).
Note
You can select this parameter only when you have
performed auto calibration and saved the
measurement result.
A.P.M.
You can set the A.P.M. (Automatic Phase
Matching) function in the DCAC (Digital
Cinema Auto Calibration) function (page 46).
x OFF
Does not activate the A.P.M. function.
x AUTO
Switches the A.P.M. function on or off
automatically.
Notes
• Even when you set this item to "AUTO," this
function does not work if you select "OFF" for the
calibration type (page 49).
• This function does not work in the following cases.
– The multi-channel input is selected.
– "2ch Analog Direct" is being used.
– Signals with a sampling frequency of 88.2 kHz
and higher are being received.
continued
107 GB