Checking the connection appropriate for your
See "1: Installing speakers" (page 20).
Connecting the monitor and video
The image quality depends on the connecting jack. See the
illustration on the right. Select the connection according
to the jacks on your components.
Q: Does your monitor have an HDMI jack?
t No: See the connection for a TV monitor without an HDMI jack in "2: Connecting the monitor" (page 24)
and "Connecting components without HDMI jacks" (page 28).
t Yes: See the connection for the TV monitor with HDMI jack in "2: Connecting the monitor" (page 24).
Q: Does your video component have an HDMI jack?
t No: See "Connecting components without HDMI jacks" (page 28).
t Yes: See "Connecting components with HDMI jacks" (page 25).
Connecting the audio components
See "4: Connecting the audio components" (page 34).
Setting the audio output settings on the connected components
To output multi-channel digital audio, check the digital audio output setting on the connected components.
For a Blu-ray Disc Player, check that "Audio (HDMI)," "Dolby Digital (Coaxial/Optical)," and "DTS (Coaxial/Optical)" are
set to "Auto," "Dolby Digital," and "DTS," respectively (as of March 2010).
For a PlayStation 3, check that "BD Audio Output Format" is set to "Bitstream" (with system software version 3.15).
For details, refer to the operating instructions supplied with the connected components.
Preparing the receiver and the remote
See "8: Preparing the receiver and the remote" (page 42).
Setting the speakers
Select the speaker pattern, then perform auto calibration. For details, see "9: Setting the speakers" (page 43) and "10:
Calibrating the appropriate speaker settings automatically (Auto Calibration)" (page 46).
You can check the speaker connection using "Test Tone" (page 111). If the sound is not output correctly, check the speaker
connection and make the settings explained above, again.
High quality image