Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver
The tuning scale for direct tuning is shown below.
• FM band
100 kHz (USA/Canadian model)
50 kHz (European model)
• AM band 10 kHz* (USA/Canadian model)
9 kHz (European model)
* The AM tuning scale can be changed (page 64).
Tuning into a station
automatically (Auto Tuning)
FM" or "
from the menu, then press
The FM or AM menu list appears on the
Select "Auto Tuning," then
In case of poor FM stereo
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning, or
select the preset station you want
The option menu appears.
Select "FM Mode," then press
Select "MONO," then press
Tuning into a station directly
Enter the frequency of a station directly by
using the numeric buttons on the multifunction
remote. This operation cannot be performed
using the simple remote.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.