You can register 3 patterns as Pos. 1, 2, and 3,
depending on the listening position, listening
environment, and measurement conditions.
To register settings for the
You can select the seating position you want
and register the measurement results of the
auto calibration for that seating position.
Select the position (Pos. 1, 2, 3) for
which you want to register the
measurement result, then press
Select "Calibration Start," then press
Press V/v repeatedly and
check the items you do not want to
measure, then press b.
The confirmation screen, asking whether
you are ready to start measurement,
Press to select "Start."
The measurement results is registered as
the position you selected in step 1.
Repeat step 1 to 4 to register another
To select the registered seating
Select the position (Pos. 1, 2, 3) you want,
The registered seating position is selected.
To name the Seating Position
You can rename the position name.
Select the the position (Pos. 1, 2, 3) you
want, then press
Select "Name Input," then press
Press V/v to select a character, then
You can shift input position backward and
forward by pressing B/b.
Repeat steps 4 to input a character one
by one, then press
The name you entered is registered.