The receiver can be operated using the
The menu is displayed on the TV screen.
Press V/v repeatedly to select
FM" or "
Select "Direct Tuning," then
Press SHIFT, then press the
numeric buttons to enter the
frequency, then press
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 (b 0*)
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
*Press the numeric button 0 when you are
using the European model.
AM," then press
If you have tuned in an AM station, adjust the
direction of the AM loop antenna (aerial) for
If you cannot tune in a station
"– – – .– – MHz" appears and then the display
returns to the current frequency.
Make sure you have entered the right
frequency. If not, repeat step 5. If you still
cannot tune in a station, the frequency is not
used in your area.
Receiving RDS broadcasts
(European model only)
The Radio Data System (RDS) is a
broadcasting service that allows radio stations
to send additional information along with the
regular program signal. This tuner offers
convenient RDS features, such as station name
display. RDS is available only for FM
* Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
Simply select a station from the FM
When you tune in a station that provides RDS
services, the station name* appears on the TV
screen and in the front panel display.
* If an RDS broadcast is not received, a station name
will not appear in the display window.
• RDS may not work properly if the station you
tuned to is not transmitting the RDS signal
properly or if the signal strength is weak.
• Some letters that can be displayed on the TV screen
cannot be displayed in the front panel display.
When a station name is displayed, you can check the
frequency by pressing DISPLAY repeatedly.