Installing the Setup Manager
application software on a
Turn on your computer and
login as an administrator.
Insert the supplied CD-ROM
into the CD-ROM drive of your
The installation launcher starts
automatically, then a Software Setup
screen appears on the screen.
If the installation launcher does not start
"SetupLauncher.exe" on the disc.
Install the Setup Manager
application software following
the instructions given in the
message on the screen.
Updating the receiver software
using the Setup Manager
You can update the receiver software using the
Setup Manager application software provided
on the CD-ROM supplied with the receiver.
Refer to the HELP of the Setup Manager for
details on operations of the Setup Manager.
Before updating the receiver software, set
"UPDATE(PC)" from "DENY" to "PERMIT"
using the display window of the receiver so
that the receiver software can be updated using
a computer (page 132).
Download the update program
from the support website on the
computer to which you
installed the Setup Manager.
Click "System" in the Setup
Manager window on the
computer screen, then click
"Browse..." and specify the
path of the update program,
and click "Start Update."
The MULTI CHANNEL DECODING
lamp on the front panel flashes while
When the updating complete, the receiver
will restart automatically.
• Do not turn the receiver off or disconnect the
network cable during software updating. It may
cause a malfunction.
• It may take 50 minutes for the software updating to
To check the HELP
When you want to check the HELP of the
Setup Manager application software,
click [Start] – [All Programs] – [Setup
Manager] – [Help for Setup Manager], in that