Using Other Features
Using "BRAVIA" Sync
What is "BRAVIA" Sync?
"BRAVIA" Sync is compatible with a Sony
TV, Blu-ray Disc/DVD player, AV amplifier,
etc., that is equipped with the Control for
By connecting Sony components that are
compatible with the "BRAVIA" Sync with an
HDMI cable (not supplied), operation is
simplified as below:
– One-Touch Play (page 96)
– System Audio Control (page 96)
– System Power-Off (page 97)
– Theater Mode Sync (page 97)
Control for HDMI is a mutual control function
standard used by HDMI CEC (Consumer
Electronics Control) for HDMI (High-
Definition Multimedia Interface).
The Control for HDMI function
does not work in the following
• When you connect the receiver to a
component which is not correspond with
Sony Control for HDMI function.
• When you connect the receiver and
components using other than HDMI
We recommend that you connect the receiver
to products featuring "BRAVIA" Sync.
Depending on the connected component, the
Control for HDMI function may not work. Refer to
the operating instructions of the component.
Preparing for the "BRAVIA"
To use the "BRAVIA" Sync, turn the Control
for HDMI function on for both the receiver
and the connected component.
Turn the Control for HDMI function of the
receiver and the connected component on
Use the multifunction remote for this
operation. This operation cannot be performed
using the simple remote.
The receiver can be operated using the
The menu is displayed on the TV screen.
Settings" from the
menu, then press
Select "HDMI," then press