Sony STR-DA3600ES Operating Instructions Manual page 94

2
Press ZONE.
The remote switches to zone 2 or zone 3.
Change the zone setting of the remote to
zone 2 or zone 3 in advance (page 93).
3
Press ?/1.
The zone function is activated.
4
Press one of the input buttons
on the remote to select the
source signals you want to
output.
For zone 2, analog video and audio
signals are output. For zone 3, only
analog audio signals are output. When
you select SOURCE, the signals of the
current input in main zone are output.
5
Adjust to a suitable volume.
• In the case of illustration 1-1
(page 90), adjust the volume using
MASTER VOL +/– on the remote.
• In the case of illustration 1-2 (page 91)
or 2 (page 91), adjust the volume using
the receiver in zone 2 or zone 3. If you
set "Zone2 Line Out Level" to
"VARIABLE," you can also adjust the
volume using MASTER VOL +/– on the
remote (page 92).
To finish the zone 2/zone 3
operation
Press ZONE, then press ?/1.
Tips
• Even when this receiver is standby mode (press
?/1 on the remote to turn off this receiver), the
receiver in zone 2 or zone 3 remains turned on. To
turn off all receivers, press ?/1 and AV ?/1 on the
multifunction remote at the same time (SYSTEM
STANDBY).
• Only signals from components connected to the
analog input jacks are output through the ZONE 2
OUT/ZONE 3 OUT jacks. No signals are output
from components connected to only the digital
input jacks.
94
GB
• When SOURCE is selected, the signals input to the
MULTI CHANNEL INPUT jacks are not output
from the ZONE 2 OUT or ZONE 3 OUT jacks
even when the multi-channel input is selected.
• The TV input, phono input, or multi-channel input
can be selected in the main zone only.
• "Server," "DMPORT," "Rhapsody,"
"SHOUTcast," "FM," "AM," or "SIRIUS" cannot
be selected in zone 3.
• You can select either "FM" or "AM" from the main
zone and zone 2. Priority is given to the choice
which has most recently been selected, even if a
different choice has already been selected in one of
the zones.
• You can select any one of "Server," "Rhapsody," or
"SHOUTcast" from the main zone and zone 2.
Priority is given to the choice which has most
recently been selected, even if a different choice
has already been selected in either zone.
• You can select only the same channel from
"SIRIUS" when listening in both the main zone
and zone 2 simultaneously. Priority is given to the
channel which has most recently been selected,
even if a different channel has already been
selected in either zone.