Receiver updating starts.
The MULTI CHANNEL DECODING
lamp on the front panel flashes while
When the updating complete, the receiver
will restart automatically.
• In the following cases, a message appears on the
TV screen and the update of the receiver is not
– When all versions are the latest one.
– When the receiver cannot retrieve the data, such
as when the network has not been set up, or
when the server is down, etc.
• Do not turn the receiver off or disconnect the
network cable during software updating. It may
cause a malfunction.
• It may take 50 minutes for the software updating to
connecting to a TV
You can operate the receiver using the display
window of the receiver even if the TV is not
connected to the receiver.
Using the menu in the display
If "GUI MODE" is displayed in the display
window of the receiver when you press
MENU, DISPLAY, or V/v, press GUI MODE
to switch the display mode of the menu to
"DISPLAY MODE." (After "GUI OFF" has
appeared in the display window of the
receiver, the receiver is switched to
Turn on the receiver.
The menu is displayed in the display
window of the receiver.
Example: When you select "Speaker Settings"
Press V/v repeatedly to select
the menu, then press