Description and location of parts
A ?/1 (on/standby)
Press to turn the receiver on or off. When
the power is on, the lamp above the button
lights up in green.
Saving the power in standby mode.
When "Control for HDMI" (page 119),
"Network Standby" (page 122), and
"RS232C Control" (page 124) are set to
"OFF," and the power for zone 2/zone 3 is
If "Control for HDMI" or "Network
Standby" is set to "ON," "A.STNDBY"
appears in the display window of the
receiver while the receiver is in standby
To remove the cover
When you remove the cover, keep it out
of reach from children.
B TONE MODE, TONE
Adjusts FRONT, CENTER,
FRONT HIGH BASS and TREBLE.
Press TONE MODE repeatedly to select
BASS or TREBLE, then turn TONE to
adjust the level.
C TUNING MODE, TUNING,
Press to operate a tuner (FM/AM) and
satellite radio (SIRIUS) (USA/Canadian
D Remote sensor
Receives signals from remote
E Display window (page 10)
F MULTI CHANNEL DECODING lamp
Lights up when multi-channel audio
signals are decoded.