ADTEK MW-5 Operating Manual page 23

Dfilt(d.FiLt): Digital filter for the
Dfilt
Active power
00
The digital filter can reduce the magnetic
0
noise or EMI in the field.
99
If the values of samples are over digital
filter band(fix in firmware and about 5% of
stable reading) 3 times (Digital Filter set to
be 3) continuously, the meter will admit the
samples and update the new reading.
Otherwise, it will be as treat as a noise
and skip the samples.
Pcode(P.CodE): Pass Code setting for
Pcode
access to programming level
1000
Please remind and write down the new
0000
pass code so that access to programming
9999
level.
Flock(F.LoCk): Function level Lock
Flock
none
There are 4 levels programmable for lock
that the function is to avoid mis-setting.
none
all
MW-5 Operating Manual 2012-07-19
Settable range:
0(no function)/1~99 times.
Shift Up Down
Settable range: 0000~9999
Shift Up Down
Programming:
none(None): no lock at all.
User can access to user level
for checking and setting.
user(User Level): User level
lock. User can access to user
level for checking, but can not
setting.
eng(Programming Level):
Programming level lock. User
can access to programming
level for checking, but can not
setting.
all(All Level): All lock. User
can access to all level for
checking, but can not setting.
& Selection Enter
Enter
Enter
21 / 36