Output Power - Quectel 5G Series Hardware Design

5G NR-FDD n20 (20 MHz)
(SCS: 15 kHz)
5G NR-FDD n25 (20 MHz)
(SCS: 15 kHz)
5G NR-FDD n28 (20 MHz)
(SCS: 15 kHz)
5G NR-TDD n38 (20 MHz)
(SCS: 30 kHz)
5G NR-TDD n40 (20 MHz)
(SCS: 30 kHz)
5G NR-TDD n41 (100 MHz)
(SCS: 30 kHz)
5G NR-FDD n48* (20 MHz)
(SCS: 15 kHz)
5G NR-FDD n66 (20 MHz)
(SCS: 15 kHz)
5G NR-FDD n71 (20 MHz)
(SCS: 15 kHz)
5G NR-TDD n77 (100 MHz)
(SCS: 30 kHz)
5G NR-TDD n78 (100 MHz)
(SCS: 30 kHz)
5G NR-TDD n79 (100 MHz)
(SCS: 30 kHz)
NOTE
1)
SIMO is a smart antenna technology that uses a single antenna at the transmitter side and two
antennas at the receiver side, which improves Rx performance.

5.1.5. Output Power

The following table shows the RF output power of the module.
Table 34: RF Output Power
Mode Frequency
WCDMA WCDMA bands
LTE LTE bands
RM500Q-GL_Hardware_Design
RM500Q-GL Hardware Design
-92.5 -94.5
-91 -91
-97 -98
-94 -93.5
TBD TBD
-83.5 -83.5
TBD TBD
TBD TBD
TBD TBD
-85 -84
-84.5 -87
-84.5 -87
Max.
24 dBm +1/-3 dB (Class 3)
23 dBm ± 2 dB (Class 3)
5G Module Series
-95.5 -89.8 dBm
-94 -90.5 dBm
-99.5 -90.8 dBm
-97 -90.6 dBm
TBD -94.0 dBm
-87 -84.0 dBm
TBD --92.9 dBm
TBD -93.5 dBm
TBD -85.3 dBm
-90 -87.8 dBm
-90 -87.8 dBm
TBD -87.8 dBm
Min.
< -50 dBm
< -40 dBm
61 / 85