Quectel 5G Series Hardware Design page 24

69 CONFIG_1
70 VCC
71 GND
72 VCC
73 GND
74 VCC
75 CONFIG_2
NOTES
1)
1. This pin is pulled LOW by default, and will be internally pulled up to 1.8 V by software configuration
、
only when (U)SIM hot-plug is enabled by AT+QSIMDET.
2)
2. If this function is required, please contact Quectel for more details.
3. Keep all NC, reserved and unused pins unconnected.
RM500Q-GL_Hardware_Design
Connected to GND
DO
internally
PI Power supply
Ground
PI Power supply
Ground
PI Power supply
Not connected
DO
internally
5G Module Series
RM500Q-GL Hardware Design
Vmin = 3.135 V
Vnorm = 3.7 V
Vmax = 4.4 V
Vmin = 3.135 V
Vnorm = 3.7 V
Vmax = 4.4 V
Vmin = 3.135 V
Vnorm = 3.7 V
Vmax = 4.4 V
23 / 85