RM500Q-GL can be applied in the following fields:
⚫
Rugged tablet PC and laptop computer
⚫
Remote monitor system
⚫
Smart metering system
⚫
Wireless CPE
⚫
Smart TV
⚫
Outdoor Live devices
⚫
Wireless router and switch
⚫
Other wireless terminal devices
2.2. Key Features
The following table describes key features of RM500Q-GL.
Table 3: Key Features of RM500Q-GL
Feature
Details
⚫
Function Interface
⚫
Power Supply
⚫
⚫
⚫
(U)SIM Interface
⚫
⚫
⚫
⚫
USB Interface
⚫
⚫
⚫
PCIe Interface
⚫
⚫
⚫
PCM Interface
⚫
⚫
RM500Q-GL_Hardware_Design
PCI Express M.2 Interface
Supply voltage: 3.135–4.4 V
Typical supply voltage: 3.7 V
Compliant with ISO/IEC 7816-3
Supported (U)SIM card: Class B (3.0 V) and Class C (1.8 V)
(U)SIM1 and (U)SIM2 interfaces
Dual SIM Single Standby
Compliant with USB 3.1 and 2.0 specifications, with maximum transmission
rates up to 10 Gbps on USB 3.1 and 480 Mbps on USB 2.0.
Used for AT command communication, data transmission, firmware upgrade,
software debugging, GNSS NMEA sentence output and voice over USB.
Supported USB serial drivers: Windows 7/8/8.1/10, Linux 2.6–5.4, Android
4.x/5.x/6.x/7.x/8.x/9.x/10
Complaint with PCIe Gen 3
PCIe × 1, supporting 8 Gbps per lane.
Used for AT command communication, data transmission, firmware upgrade,
software debugging, GNSS NMEA sentence output
Used for audio function with external codec
Supports 16-bit linear data format
Supports long and short frame synchronization
Supports master and slave modes, but must be the master in long frame
5G Module Series
RM500Q-GL Hardware Design
14 / 85