Firmware Upgrade Through Sd-Card Or Usb Dongle - btsr MULTIFEEDER Operating Manual

Appendix A

Firmware upgrade through SD-CARD or USB dongle

Create a folder with name UPGRADE on SD-CARD or
USB dongle and copy the upgrade file provided by
(extension ".p32")
Insert the SD-CARD or the USB dongle into the relevant
slot
Once you have inserted the SD-CARD or the USB dongle,
the 4 LEDs start blinking. Press the ENTER button to start
the firmware upgrade. During the upgrading stage, the 4
indicated LEDs start blinking in sequence one at a time
until the procedure is completed:
NEXT CYCLE
MULTIFEEDER
START/STOP
ZPX
PRX
APPENDIX A
- A.1 -