Advanced Programming Of Multifeeder Devices - btsr MULTIFEEDER Operating Manual

Advanced Programming of MULTIFEEDER Devices

With the
programmed with specific control parameters which depend on the type of yarn under
processing, and on the type of application.
•
MAIN TENSION
•
ERROR TENSION
•
TIME ALARM
•
INC-DEC TENSION
•
EXIT TENSION
•
RELAX YARN
•
RELAX SPEED
In addition, you can program particular functions and/or service parameters that affect the
device operating mode:
•
APPLICATION
•
YARN TYPE
•
OFFSET
•
ACCESS CODE
•
U-FEEDER CODE
•
LANGUAGE
•
SIGNAL POLARITY
Setting of these parameters is already done by BTSR during manufacturing (default
values), however it can be easily changed by the textile machine operator, to meet specific
requirements, using the advanced programming features.
MULTIFEEDER devices offer 4 advanced programming levels: P1, P2, P3 and P4, clearly
indicated in the messages area of LCD during the programming sequences.
Within the P1 level the following parameters can be programmed:
MAIN TENSION
ERROR TENSION
TIME ALARM
INC
Within the P2 level the following parameters can be programmed:
EXIT TENSION
RELAX YARN
RELAX SPEED
- 3-6 -
programming environment, each MULTIFEEDER can be
ADVANCED
-
DEC TENSION
MULTIFEEDER
Control Tension
Tolerance beyond which an Error is generated
Time for which the tension may stay out of tolerance
∆ Tension for INC/DEC graduation
Device Tension with machine stationary
It corresponds to the number of revolutions carried out at
constant speed during the yarn relax stage
Yarn feeding speed during the
Device operating mode, pre-defined according to the
application. The following pre-defined applications are
available: ,
SOCKS REVERSE SOCKS
,
PANTYHOSE SEAMLESS
,
SMALL LOOM SEWING
Possibility of presetting the device for management of
elastic yarns.
Possibility of reading/setting the
Possibility of setting a protection password to prevent
undesired access to the device programmable functions.
Possibility of visualizing and/or directly setting the device
identification code.
Possibility of choosing the language used to show the
message on the device display.
Possibility of choosing the polarity of
signals (either NO or NC).
stage
RELAX YARN
,
MEDICAL SOCKS
, ,
KNIT REVERSE KNIT
, .
RASCHEL
value.
OFFSET
-
INC DEC
Operation
,
, ,
FLAT KNIT
and
STOP