Standard Installation; Install Latchbolt, Lockbody And Inside Trim - Assa Abloy Corbin Russwin CL3100 Series Installation Instructions Manual

Grade 1 Key-In-Lever VR Lever Lock
CL3100 Series
Installation Instructions
1

Standard Installation

a

Install Latchbolt, Lockbody and Inside Trim

Important
The accuracy of door preparation is critical for proper functioning and security of lever handle lock. Misalignment can
cause premature wear and lessening of security.
Item Description
1 Bearing SA
2 Latch SA
3 Aligning Pin
4 Screw Packet
5 Inside Sleeve SA
6 Outside Sleeve SA
7 Collar, Sleeve SA
8 Plate, Rose Support
9 Collar, Rose Support Plate
10 Rose
11 Cylinder
12 Outside Lever
13 Inside Lever
6 Lobe Security Set Screw
14
1/4-28 x 11/64
For Installation Assistance contact Corbin Russwin
1-888-607-5703 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2016, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
4
Qty.
1
1
1
1
1
1
1
2
Figure 1
2
2
1
1
1
2
Rose Installation Tool
(RIT)
CL3100 Cylinder Installation - Standard Installation
3
CL3100 Wrench
6 Lobe Security
Wrench
TEST OPERATION:
Rotate levers to be sure
latchbolt moves freely.
DO NOT FORCE.
If lockset does not operate
properly, remove lockset from
door and check door preparation.
FM345 01/19