Removing The Cutting Unit (Combiclip 103, Combiclip 112) - Husqvarna Rider 16C AWD Workshop Manual

Removing the cutting unit
(CombiClip 103, CombiClip 112)
!
WARNING!
Wear protective glasses when
dismantling the cutting unit. The
springs that tension the belt can fly
off and cause personal injury.
1. Carry out points 1-6 to put the cutting
unit in the service position, see Service
position for the cutting unit.
2. Lower the cutting unit.
3. Open the unit catch.
4. Pull out the cutting unit.
REPAIR INSTRUCTIONS
Equipment frame pulled forwards
Equipment frame pulled forwards
Equipment frame pulled forwards
8042-515
8042-238
8042-215
97
English-