Removing the cutting unit
The cutting deck can be removed in order to
facilitate cleaning and servicing.
To remove the cutting deck proceed as follows:
1 Position the machine on fl at ground.
2 Apply and lock the parking brake.
3 Check that the lever for setting the cutting height
is in the S position.
4 Put the lifting lever in the mowing position.
5 Release the clip on the front hood and lift off the
fender.
6 Loosen the spring on the drive belt's belt idler by
loosening the handle.
7 Lift of the drive belt.
8 Grab the upper pipe construction of the deck and
pull it out.
Reparation instructions
39
English –