7.
Fit the anti-scalp rollers in position
8.
Fit the front cover.
9.
Secure the springs on the adjuster
pulley.
Removing the cutting unit
!
WARNING!
Wear protective glasses when
dismantling the cutting unit. The
springs that tension the belt can fly
off and cause personal injury.
1.
Follow "The cutting unit's service
position", points 1–9 to put the cutting
unit in the service position.
2.
Remove the bolt (3) and lift off the
cutting unit.
REPAIR INSTRUCTIONS
Support wheels
Adjuster pulley's spring
Bolt
8009-439
8009-598
8009-674
105
English-