Husqvarna Rider 16C AWD Workshop Manual page 40

3. Press in the belt adjuster and align the
pump belt in position.
4. Fit the belt guide. Adjust the belt guide
against the lower belt in the belt pulley
as needed. Fit the skid guard if used.
5. Attach the throttle cable to the carburet-
tor and fit the cable clip without tighten-
ing it.
6. Move the accelerator to the full choke
position. Pull the cable's outer casing as
far to the right as possible and tighten
the clamping screw. Pull back the throttle
to the full throttle position and check that
the choke is no longer activated.
40
English-
REPAIR INSTRUCTIONS
8009-839
8009-737
8009-402
8009-403