7.
Grip the front edge of the unit and pull
forwards until it stops.
8.
Unscrew the screws holding the cutting
deck.
The cutting unit's service position
In order to provide good accessibility for
cleaning, repair and servicing, the unit can be
set in the service position. The service
position means that the unit is raised and
locked in the vertical position.
Placing in the Service Position
(CombiClip 103, CombiClip 112)
1.
Position the machine on flat ground.
Apply the parking brake.
2.
Set the cutting height control in the
lowest position and lift up the cutting unit.
100
English-
REPAIR INSTRUCTIONS
8042-052
8042-118
8042-047