Operation
6.3.1.
Menu layout and navigation
Groups
ID
Group selection
Direct display via ID
32
SAEx 07.2
SAEx 16.2 / SAREx 07.2
The indications on the display are divided into 3 groups:
Figure 26: Groups
[1]
Startup menu
[2]
Status menu
[3]
Main menu
Status menu and main menu are marked with an ID.
Figure 27: Marking with ID
S
ID starts with
S
= status menu
M
ID starts with
= main menu
M
It is possible to select between status menu S and main menu M:
For this, set selector switch to 0 (OFF), hold down push button C for approx. 2
seconds until a screen containing the ID M... appears.
Figure 28: Select menu groups
You return to the status menu if:
the push buttons on the local controls have not been operated within 10 minutes
or by briefly pressing C
When entering the ID within the main menu, screens can be displayed directly (without
clicking through).
Figure 29: Direct display (example)
Display indicates in the bottom row: Go to
1.
Press push button
Display indicates: Go to menu M0000
2.
Use push buttons
3.
Press push button
4.
Repeat steps 2 and 3 for all further digits.
5.
To cancel the process: Press C Esc.
SAREx 16.2 Control unit: electronic (MWG)
Go to.
Up ▲ Down ▼ to select figures 0 to 9.
Ok to confirm first digit.
ACExC 01.2 Non-Intrusive