YASKAWA E7N Technical Manual page 96

Only Drive terminals A1, A2, S6, S7 and SN are available for other uses. They have been brought out to terminals on the E7N
PCB A2:
Drive
Terminal
A1
A2
S6
S7
SN
Table 5.1 through Table 5.4 and the accompanying paragraphs explain the programming of the Drive for the E7N Bypass
application, including these "virtual terminals."
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Drive Terminals Correspondence to E7N Terminals
E7N PCB A2 Drive Function
Terminal Selection Parameter
TB3-3
TB3-3 H3-08, H3-13
TB5-5
TB5-4
TB5-2 Digital Common
Programming 5 - 3
E7N PCB A2
DIP Switch
b1-01 S1-3, S1-4
S1-2, S1-3, S1-4
H1-04 N/A
H1-05 N/A
N/A