TP-Link T3700G-28TQ User Manual page 342

Choose the menu SNMP→Notification→Notification Config to load the following page.
The following entries are displayed on this screen:
Host Config

IP Address:
User:
Security Model:
Type:
Retry:
Timeout:
Notification Table

Select:
IP Address:
UDP Port:
User:
Security Model:
Security Level:
Figure15-8 Notification Config
Enter the IP Address of the management Host.
Enter the User name of the management station.
Select the Security Model of the management station.
Select the type for the notifications.
Trap: Indicates traps are sent.
•
• Inform: Indicates informs are sent. The Inform type has a
higher security than the Trap type.
Specify the amount of times the switch resends an inform
request. The switch will resend the inform request if it doesn't
get the response from the management station during the
Timeout interval, and it will terminate resending the inform
request if the resending times reach the specified Retry times.
Specify the maximum time for the switch to wait for the
response from the management station before resending a
request.
Select the desired entry to delete the corresponding
management station.
Displays the IP Address of the management host.
Displays the UDP port used to send notifications.
Displays the User name of the management station.
Displays the Security Model of the management station.
Displays the Security Level for the SNMP v3 User.
330