TP-Link T3700G-28TQ User Manual page 245

Choose the menu Multicast Routing→IGMP→Profile Binding to load the following page.
The following entries are displayed on this screen:
Profile and Max Group Binding

UNIT:
Select:
Port:
Profile ID:
Max Group:
Overflow Action:
LAG:
ClearBinding:
Figure 11-9 Profile Binding
Select the unit ID of the desired member in the stack.
Select the desired entry for configuration.
The port to be bound.
The existing Profile ID bound to the selected port.
The maximum multicast group a port can join.
The policy should be taken when the number of multicast
group a port has joined reach the maximum.
Drop: drop the successive report packet, and this port

cannot join any other multicast group.
Replace: when the number of the dynamic multicast

groups that a port joins has exceeded the max-group, the
newly joined multicast group will replace an existing
multicast group with the lowest multicast group address.
The LAG number which the port belongs to.
Click the ClearBinding button to clear all profiles bound to the
port.
233