Interface Config - TP-Link T3700G-28TQ User Manual

IS_EX: indicating the mapping relationship between the multicast group and the multicast

source list is EXCLUDE, which means the host will only receive the multicast data sending to
this multicast group with its source not in the specified source list.
TO_IN: indicating the mapping relationship between the multicast group and the multicast

source list changes from EXCLUDE to INCLUDE.
TO_EX: indicating the mapping relationship between the multicast group and the multicast

source list changes from INCLUDE to EXCLUDE.
ALLOW: indicating the host expects to receive multicast data from more multicast sources

besides the current ones. If the current mapping relationship is INCLUDE, these multicast
sources will be added to the multicast source list; if the current mapping relationship is
EXCLUDE, these multicast sources will be deleted from the multicast source list.
BLOCK: indicating the host doesn't expect to receive multicast data from the specific multicast

sources any longer. If the current mapping relationship is INCLUDE, these multicast sources
will be deleted from the multicast source list; if the current mapping relationship is EXCLUDE,
these multicast sources will be added to the multicast source list.

11.2.1 Interface Config

Choose the menu Multicast Routing→IGMP→Interface Config to load the following page.
The following entries are displayed on this screen:
Search Option

Interface VLAN:
Loopback:
Routed Port:
Interface Configuration

Select:
Interface:
Status:
Version:
Figure 11-5 Interface Config
Enter the VLAN ID the desired entry must carry.
Enter the Loopback ID the desired entry must carry.
Enter the routed port the desired entry must carry.
Select the interface for which parameters is to be configured.
The interface for which data is to be displayed or configured.
The interface status. You can select Enable/Disable the IGMP
function for the interface.
There are three versions for IGMP protocol.
IGMPv1: the interface is now an IGMPv1 Router.

IGMPv2: the interface is now an IGMPv2 Router.

IGMPv3: the interface is now an IGMPv3 Router.

228