TP-Link T3700G-28TQ User Manual page 232

Network Diagram

Configuration Procedure

 Configure Switch A
Steps Operation
1 Configure
interface and its
IP address.
2 Add port to the
interface.
3 Create VRRP
4 Configure
VRRP priority
 Configure Switch B
Steps Operation
1 Configure
interface and its
IP address.
2 Add port to the
interface.
3 Create VRRP
Note
the On page Routing→Interface→Interface Config, create the interface
VLAN2, and configure its IP address as 192.168.1.1 and Subnet Mask
as 255.255.255.0.
On page VLAN→802.1Q VLAN→VLAN Config, add port 5 to
interface VLAN 2.
On page Routing→VRRP→Basic Config, create a VRRP instance
with the VRID as 1, the interface as VLAN 2 and the Virtual IP as
192.168.1.10.
On page Routing→VRRP→Advanced Config, configure the VRRP
priority of interface VLAN 2 as 110.
Note
the On page Routing→ Interface→ Interface Config, create the interface
VLAN2, and configure its IP address as 192.168.1.2 and Subnet Mask
as 255.255.255.0.
On page VLAN→802.1Q VLAN→VLAN Config, add port 5 to
interface VLAN 2.
On page Routing→VRRP→Basic Config, create a VRRP instance
with the VRID as 1, the interface as VLAN 2 and the Virtual IP as
192.168.1.10.
220
Return to CONTENTS