16.4.3 Local Info
On this page you can see all ports' LLDP-MED configuration.
Choose the menu LLDP→LLDP-MED→Local Info to load the following page.
The following entries are displayed on this screen
Auto Refresh
Auto Refresh:
Refresh Rate:
Local-MED Local Info
Select the desired port to display the information of the corresponding port.
Local Interface:
Device Type:
should be used, but may not be known. Options (0) and (1)
should not be used unless it is known that the DHCP client is in
close physical proximity to the server or network element.
Country Code: The two-letters ISO 3166 country code in
•
capital ASCII letters, e.g., CN or US.
Language, Province/State, etc.: a part of civic address.
•
Figure 16-9 LLDP-MED Local Information
:
Enable/Disable the auto refresh function.
Specify the auto refresh rate.
Enable/Disable the auto refresh function.
Specify the auto refresh rate.
350