Neighbor Table - TP-Link T3700G-28TQ User Manual

Tag:
NSSA Only:
Advertise:
ASBR Aggregation Table

Process:
Select:
IP Address:
Subnet Mask:
Tag:
NSSA Only:
Advertise:

10.9.10 Neighbor Table

Choose the menu Routing→OSPF→Neighbor Table to load the following page.
The following entries are displayed on this screen:
Neighbor Table

Process:
Interface:
Neighbor IP
Address:
Router ID:
Area ID:
Options:
Router Priority:
Set the tag field in redistributed address range. The valid value
ranges from 0 to 4294967295 and the default is 0.
Set whether or not to limit redistributed address range to
NSSA areas. The default is Disable.
Set whether or not the address range will be redistributed to
OSPF domain via an AS-External LSA. The default is Enable.
Select one OSPF Process to display its address range list.
Select the desired item for configuration. It is multi-optional.
Displays the IP address of the address range.
Displays the subnet mask of the address range.
Displays the tag value in redistributed address range and it
can be modified.
Displays the NSSA-Only parameter and it can be modified.
Displays the Advertise parameter and it can be modified.
Figure10-55 Neighbor Table
Select one OSPF Process to display its neighbor list.
Displays the interface for which neighbor list is to be
displayed.
The IP address of the neighboring router's interface to the
attached network.
A 32 bit integer in dotted decimal format representing the
neighbor.
The area ID of the OSPF area associated with the interface.
An integer value that indicates the optional OSPF capabilities
supported by the neighbor. The neighbor's optional OSPF
capabilities are also listed in its Hello packets.
The router priority of the neighbor.
204